Toyota Hilux (2005-2015) Load Bar Kit / Track AND Feet
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low-profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars. These. Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low-profile and smaller footprint is preferred.
Uses the same strong, corrosion-free aluminium slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather-resistant black powder-coated aluminium. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Specifications
KRTH012 - Toyota Hilux (2005-2015) Load Bar Kit / Track AND Feet - by Front Runner.
Consists of:
1 x FASS024 - Foot Set / 50mm-60mm - by Front Runner
1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner
1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner
1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner.
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate installed weight:
8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicle’s roof.
Shipping dimensions:
Width: 115mm (5)
Length: 1290mm (51)
Height: 240mm (9)
Shipping weight:
Weight: 8.9kg (19.5lbs)
Dimensions: L: 115.0mm × W: 1290.0mm × D: 240.0mm
Weight: 8.90kg
Original: $456.63
-65%$456.63
$159.82Toyota Hilux (2005-2015) Load Bar Kit / Track AND Feet
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low-profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars. These. Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low-profile and smaller footprint is preferred.
Uses the same strong, corrosion-free aluminium slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather-resistant black powder-coated aluminium. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Specifications
KRTH012 - Toyota Hilux (2005-2015) Load Bar Kit / Track AND Feet - by Front Runner.
Consists of:
1 x FASS024 - Foot Set / 50mm-60mm - by Front Runner
1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner
1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner
1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner.
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate installed weight:
8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicle’s roof.
Shipping dimensions:
Width: 115mm (5)
Length: 1290mm (51)
Height: 240mm (9)
Shipping weight:
Weight: 8.9kg (19.5lbs)
Dimensions: L: 115.0mm × W: 1290.0mm × D: 240.0mm
Weight: 8.90kg
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low-profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars. These. Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low-profile and smaller footprint is preferred.
Uses the same strong, corrosion-free aluminium slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather-resistant black powder-coated aluminium. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Specifications
KRTH012 - Toyota Hilux (2005-2015) Load Bar Kit / Track AND Feet - by Front Runner.
Consists of:
1 x FASS024 - Foot Set / 50mm-60mm - by Front Runner
1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner
1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner
1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner.
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate installed weight:
8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicle’s roof.
Shipping dimensions:
Width: 115mm (5)
Length: 1290mm (51)
Height: 240mm (9)
Shipping weight:
Weight: 8.9kg (19.5lbs)
Dimensions: L: 115.0mm × W: 1290.0mm × D: 240.0mm
Weight: 8.90kg
